Bubble hash bags (bubble icer): microns and grades explained
By the Golden High teamUpdated 15 November 20269 min read
Extraction gear
Bubble hash bags, sometimes sold as a "bubble icer", are a set of filter bags with graded mesh, from 220 down to 25 microns, used to separate cannabis trichomes in ice water to make bubble hash. The name blends two brands that became generic, Bubble Bags and the Ice-O-Lator, and now covers every kit of this kind. Here's how these bags work, what the microns tell you, how they differ from the Pollinator, and why the method changes nothing about a product's legal status.
White Piatella Delta-P 30 %
Light in colour, with a soft texture that crumbles easily, and notes of warm spice and citrus. The style born from the ice-water method, in a Delta-P version.
From6,50 €View product →3X Filtré Delta-P 40 %
Our triple-filtered resin: soft, even texture, earthy profile, strength shown and lab-tested.
From6,50 €View product →The definition
Bubble hash bags: bags, not a machine.
Search for "bubble icer" and you'll land on grow shop pages talking about bubble bags, ice bags or extraction bags. It's the same family of objects: nylon or polyester bags, each fitted at the bottom with a screen of a precise size, stacked one inside the other. There's no single product with that name: the term floats around as a blend of the best-known brands.
Their job is sorting. Trichomes, the tiny resin glands that cover the flowers and carry cannabinoids and terpenes, turn brittle in very cold water and break off the plant. The bags then catch them by size, from largest to finest. What you collect is called bubble hash, or ice-water hash: we told its story in our article on the Ice-O-Lator and bubble hash.
Bubble bags and microns
Each bag has its own job.
A micron (µm) is a thousandth of a millimetre. The finer the mesh, the smaller the particles a bag holds back. In an 8-bag kit, the first three are mainly for cleaning, the next five for collecting fractions of different quality. Manufacturers' guides agree on this split.
220 µm
The work bag. It holds the plant material and catches leaves, stems and crushed ice.
190 and 160 µm
Cleaning bags: large debris, a few trichomes mixed with plant matter. Low grades.
120 and 90 µm
The big mature trichome heads. Along with the 73, this is the most sought-after fraction.
73 µm
According to several manufacturers, this is the bag that holds the largest share of usable resin.
45 and 25 µm
Small heads and fine dust. The 25 acts as the "floor": nothing gets through below it except water.
Why so many bags? A 3- or 4-bag kit gives a more mixed harvest. The middle bags don't collect more resin, they split it into narrower grades. It's the same logic as dry sifting, which we explained in static hash and dry sift.
Sizes vary slightly from brand to brand and nothing is standardised. One manufacturer's "73" isn't necessarily the same as another's.
An Amsterdam story
Two brands born in the same year.
The story starts at the Amsterdam Cannabis Cup. According to High Times magazine, an ice-water extraction demo in 1997 inspired several pioneers. Mark Rose built a prototype set of bags, then teamed up with Canadian Marcus Richardson, known as Bubbleman. Together, they launched Bubble Bags in late 1998.
That same year, Dutch inventor Mila Jansen, nicknamed the "Queen of Hash", brought out the Ice-O-Lator, a kit of graded bags to use with water and ice. Four years earlier, in 1994, she had invented the Pollinator. She later offered the Bubbleator, a motorised version of the Ice-O-Lator.
Bubble Bags
Bubbleman's bags, launched in late 1998. Their name gave us "bubble hash" and "bubble bags", now used for every brand.
Ice-O-Lator
Mila Jansen's kit, 1998. In everyday use, its name became the name of the ice-water method itself.
"Bubble icer" is a kind of cross between the two: bubble for the bag, icer for the ice. You'll even find bags on sale called "Secret-Icer". Whatever the name on the label, the object is the same.
Ice water or dry
The Pollinator, the other route.
The Pollinator doesn't use water. It's a rotating drum lined with a screen, spinning like a tumble dryer: the trichomes on the dried plant break off through friction and fall through the mesh. The result is a powder, pollen or kief, which can then be pressed.
| Bubble hash bags (ice water) | Pollinator (dry tumbler) | Hand screen | |
|---|---|---|---|
| Starting material | Dried or frozen plant | Dried plant | Dried plant |
| Separating agent | Water and ice | Rotation and friction | Shaking by hand |
| Product | Bubble hash, after drying | Pollen, kief, dry sift | Kief |
| Tricky step | Drying (risk of mould) | Avoiding too much plant matter | Low yield |
| Top end | Full melt, the base of Piatella | Static hash, refined dry sift | — |
When the plant is frozen right after harvest, it's called fresh frozen: that's the material that gives the most aromatic bubble hash, as we explained in our article on frozen hash.
What the sources say
Stars, an informal scale.
Bubble hash is graded on a scale of 1 to 6 stars, based on how well it melts under heat. No authority defines it: it's an industry habit. Here's what specialist sources report.
Lowtemp Plates · microns
The purest bubble hash is concentrated between 90 and 120 µm, where mature trichome heads sit with the fewest impurities. The 5- and 6-star grades, known as full melt, mostly come from these bags.
Trimleaf · kit guide
Mature heads mostly fall within the 70 to 120 µm range. The middle bags of an 8-bag kit sort more finely, without increasing the total amount collected.
High Times · Bubbleman
The magazine traces the birth of Bubble Bags and the use of "six-star melt" for the best ice-water hash.
The takeaway
Stars describe purity and how the hash behaves under heat. They tell you nothing about cannabinoid levels, lab testing or the product's origin.
Two producers can give different stars to the same material. On a finished product, the label matters less than the look, the smell and, above all, a lab-tested level. References at the bottom of the page.
Safety and framework
No solvents, but not without rules.
Lots of people search for a "bubble icer how-to". Here we stick to the principle: what helps you understand and judge a product, not a process to follow. In France, THC cannabis and its resins are controlled drugs: extracting hash from them is illegal, whatever the equipment.
- No flammable solvent. Unlike butane extractions, the method uses only water and ice: that's why it has a reputation as a "clean" method.
- Drying is the critical step. Hash that keeps moisture can go mouldy. Manufacturers recommend a perfectly dry product, stored cold, away from air and light.
- Hygiene matters. Food-grade containers, clean bags: whatever touches the resin ends up in the smoke.
The equipment doesn't change the product's status. Bubble hash made from THC cannabis is a controlled drug in France, on the list set by the order of 22 February 1990. Only hemp products under 0.3% THC are tolerated. We give no recipe for THC products.
At Golden High
The ice-water style, in a Delta-P version.
Golden High sells neither extraction bags nor THC bubble hash. Our resins echo a style, a texture and an aroma profile in a Delta-P version: a CBDX-based range, under 0.3% THC, lab-tested. The framework is explained on our dedicated Delta-P page.
If you love the light, soft texture of the ice-water method, take a look at White Piatella Delta-P 30 %, with a moderate strength. For a denser profile, 3X Filtré at 40% follows the logic of grades. All our resins are in the Delta-P hash collection, with the strength on every product page.
Check the strength
Every product page shows it. If you're new, start with the mildest.
Dose small
The size of a grain of rice to start with, then give it time before having more.
Keep it cool
Airtight box, away from light. Adults only, never before driving.
Your questions
What people ask us about bubble bags.
What are bubble hash bags (a bubble icer)?
A set of filter bags with graded mesh, from 220 to 25 µm, used to separate cannabis trichomes in ice water. The name "bubble icer" blends Bubble Bags and the Ice-O-Lator.
What's the difference between bubble bags and the Ice-O-Lator?
None in principle. They're two brands of ice-water bags launched in 1998, one by Bubbleman and Mark Rose, the other by Mila Jansen. Their names became generic.
Which microns are best for bubble hash?
According to manufacturers, mature trichome heads mostly end up between 73 and 120 µm. The 160 to 220 µm bags are for cleaning, while the 45 and 25 µm bags collect the fines.
How many bags do you need in a kit?
You'll find kits of 3, 4 or 8 bags. The more bags, the finer the sorting by grade, without increasing the total amount collected.
What is a Pollinator?
A rotating drum invented by Mila Jansen in 1994. It knocks trichomes off the dried plant without water, and they fall through a mesh. It makes pollen or kief, not bubble hash.
What does full melt mean?
A 5- or 6-star bubble hash, pure enough to melt almost completely under heat. It's an industry scale, with no official standard.
Is bubble hash legal in France?
Not if it's made from THC cannabis: it's a controlled drug in France. Only hemp products under 0.3% THC are tolerated, whatever the method.
Sources
The references cited in this article.
- High Times (2023). What Makes Bubbleman Bubble?
- Cannactiva. Mila Jansen: God Save the Queen (of Hash)
- Trimleaf. Bubble Hash Starter Kit: Everything You Need for Your First Wash
- Lowtemp Plates. What Is the Best Micron for Bubble Hash?
- Higarden. Secret-Icer, extraction bags (product page).
- Légifrance. Order of 22 February 1990 setting the list of substances classified as controlled drugs; Order of 30 December 2021 implementing Article R. 5132-86 of the French Public Health Code (in French).
Keep reading














